Combining the abrasive powder of small, hard particles and big, soft particles, Glaco Glass Compound Roll-On is able to remove the toughest stains made from oily dirt and fluorine film. By just applying the product lightly onto the glass you will see immediate results as the roll-on removes the oil-film with ease. This convenient product can be used as surface preparation just before applying any coating to the glass.
Directions
1. Remove dust and dirt from glass with water, wipe off any water drops remaining on surface.
2. Shake bottle well with cap on and remove plastic seal.
3. Squeeze handle part of bottle to release compound liquid.
4.Polish onto glass until surface stops repelling liquid.
5. Wait for compound to dry, then wash glass clean with water to make a slurry and wipe off.
6. Remove polishing pad from applicator, then wash and dry for future use.
Maintains a strong coating which resists friction from wipers, dust, car-wash or cleansers, and lasts 6 times longer than conventional coating agents. The water repellency lasts up about 1 year.
Directions
1. Remove dust and dirt from windscreen with water.
2. Use ‘Glaco Roll On Compound’ in advance for surface preparation.
3. Take cap off and apply on dry windscreen.
4. Press side of bottle to allow fluid out and rub firmly onto windscreen without splashing fluid. * Do not apply on wet windscreen as it may cause uneven marks to surface.
5. After drying for 5-10 minutes, wipe off with a dry clean towel.
6. Allow drying for at least 12 hours for coating to bond firmly onto windscreen.
Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.
✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water
✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc
✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily
✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface
✔️ Coats up to 40 vehicles!
Directions
* Make sure that your car colour is compatible with product.
1. Wash and decontaminate car surface.
2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.
3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.
Repellent prevents water from remaining on the surface by lining the mirror with super-fine, microscopic studs. Spray creates an even coating and shortens the process. Suitable for reverse surfaces such as mirrors and reverse cameras.
1. Spray evenly onto surface from a distance of approximately 15cm. We recommend putting a towel around the mirror while spraying, in order to prevent fluid getting on other parts
2. Allow to dry completely (in the summer for 1 hour, in the winter for 2 hours)
Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.
✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water
✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc
✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily
✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface
✔️ Coats up to 40 vehicles!
Directions
* Make sure that your car colour is compatible with product.
1. Wash and decontaminate car surface.
2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.
3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ anddo not wash the car in next 24 hours to allow polymerisation.
pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.
Directions
1. Wash off sand, mud or dust prior to spraying.
2. Shake bottle well approx. 20 times, and turn trigger "ON".
3. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.
4. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.
* When spray over brake disc, it reacts and changes colour.
Rinse away immediately, if left on too long, may cause bad effects for brake disc.
5. Wipe off with clean towel.
Carry out brake test with low gear 2-3 times after cleaning.
* This product is formulated for wheel.
If use for car body, carefully rinse off with water afterwards.
The Kiwami, which translates to Extreme Gloss, is a great product for those who desire perfect balance between glossy finish and protection. Extreme Gloss is very easy producing a strong beading effect. Making your car paint shiny and smooth as silk! Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car colour is compatible with product.
1. Wash and decontaminate car surface.
2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.
3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.
* Drying time may be longer in cold temperature.
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Formulated to coat polycarbonate plastic and glass, such as headlight covers, side visors, tail lamp covers, helmet shields and goggles. Specially designed curved applicator and included microfiber cloth for ease of application. Repels water under air pressure when driving. If you are a motorcycle or race car enthusiast, this product sure is suited for your needs!
Directions
1. Prepare the surfaces by washing and decontaminating.
2. Take off the cap and apply directly with felt applicator.
3. Apply gently ensuring full coverage.
4. Immediately wipe off with included towel.
*No need to wait for drying. Wipe off immediately before liquid gets dry.
Newly formulated triple-abrasive particles easily removes scaly spots which conventional compound cleaners cannot. Removes fluorine and sticky oil-film deposits. Restores car's glass close to original transparency. Special application pad is included.
Directions
1. Remove dust and dirt from glass with water, dry off any water remaining on surface.
2. Shake bottle well.
3. Pour liquid onto white side of included pad, begin to polish surface of glass.
Contents - 1x Coating Agent bottle (15mL), 2x Hard Sponge, 2x Soft Sponge, 3x Silicone off Wipes Sheets, 2x Gloves
Features
Bring the life back to faded plastic and rubber trim! This treatment restores the deep darkness, natural gloss, and rich texture of black trim to revitalize your vehicle. The unique coating liquid penetrates into the surface and polymerizes to form a flexible yet glossy surface, making it suitable for restoring both hard plastic and soft rubber!
Direction
Note: Apply only to clean, dry, unpainted plastic and rubber.
1. First clean and degrease the area to be treated using the included ‘Silicone Off’ degreasing sheets.
Note: Some textured plastics may pick up fibers from the sheet. Remove these before proceeding. To prevent the sheets from drying out, firmly seal the package between uses.
2. Cut sponge to suitable size for area to be treated. The black sponge is for hard plastic, the white sponge is for soft rubber. Apply a small amount of the liquid (green label), and spread thinly and evenly across the surface to be treated.
Note: Some rubber parts may absorb the liquid. Keep applying until enough liquid remains.
3. After drying for around 5 minutes, use a fresh sheet to lightly wipe up the surface for an even finish. If left for too long, the excess will not be possible to remove.
Note: Do not touch or wet for 24 hours. Do not reuse sponges that have hardened. If the liquid unintentionally comes into contact with another surface, wipe off immediately.
Solid wax creates a hard coating durable up to 1 month. Enhances tire natural gloss black. Can be used to on tires, convertible leather top, fix scuff marks on exterior bumper and trims.
Directions
1. Remove dirt from tires, convertible leather top or bumper in advance.
2. Take cap off and take out included applicator sponge.
3. Put wax on desired area and apply it thinly.
4. Allow to dry for approximately (5-10 minutes), polish with a soft cloth to get ultimate, beautiful matte finish.
Gel type spray glass cleaner lets you clean the glass easily without any liquid or water droplets leaving residue. The cleaning components are held in the gel, giving time to penetrate dirt and increase the effectiveness of cleaning stubborn dirt, such as bird droppings. Also suitable for use on mirrors, unpainted plastic, and rubber parts.
Directions
1. Turn the spray nozzle to “ON”.
2. Without shaking, spray onto the glass surface from 15 – 20cm away, then immediately wipe around the glass with a clean, dry towel.
3. Wipe up the dirt, changing to a fresh surface of the towel when necessary.
*If some residue remains on the glass, wipe again with a clean towel.
Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Making use of a specially-developed highly-reactive silicone compound, this glass sealant bonds instantly to the surface, meaning there is no need to dry before wiping off.
Directions
Apply only to clean, dry glass.
1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.
2. Use the felt applicator to rub the liquid all around the glass. Work on a 50 x 50 cm area at a time.
3. Immediately wipe with a clean, dry towel to spread the liquid over the whole surface and wipe off. Move on to the next area.
*Note: avoid wetting for 10 minutes after application.
This product is strictly manufactured and tested in Japan and has a high content of first grade Brazilian crystal white carnauba. Throughout manufacturing process it has been cool down naturally unlike conventional wax that cools down immediately with the help of machinery. Cosmetic grade included sponge. No compound is included and is suitable with all colours vehicles.
What comes in the box?
· Retail packaging
· Plastic toolkit which contains 3 purpose (Brush, opener and pick)
· Cosmetic grade applicator sponge
· Soft rubber bottom, prevent you scratching the car surface if you put in on top your car bodywork
Product is perfect for Show N Shine events!
Directions
1. Remove any dirt on the car bodywork with car shampoo.
2. Apply moderate amount of wax with the sponge included and spread it as even as possible.
3. Allow it to dry for at least 10-15minutes (conditions apply).
4. Use a car detailing grade microfiber cloth to wipe of residue, flip towel if necessary in between process.
*Note for best results:
We recommend buffing off with SOFT99 ‘Wipe Cloth’.
Clay bar after car wash and proper compound process is needed.
Sponge is not necessary to be damp when applying wax.
In colder weather, it is recommend to allow more time for the wax to cure on the bodywork.
If wax caught in badges and tiny gaps, use the tool included (Pick and brush).
The name speaks for itself, extremely high gloss finish wax. King of Gloss creates a thick, heavy gloss coating of synthetic resin that coats your car and gives it the great gloss look similar to transparent nail polish. Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car colour is compatible with this product.
* Wash and decontaminate car surface.
1. Take a moderate amount of wax and spread evenly onto car's body using included applicator sponge.
2. After surface gets dry (5-10 minutes), wipe off with a soft clean towel.
*We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.
*Drying time may be longer in winter .
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
The name speaks for itself, extremely high gloss finish wax. King of Gloss creates a thick, heavy gloss coating of synthetic resin that coats your car and gives it the great gloss look similar to transparent nail polish. Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car colour is compatible with this product.
* Wash and decontaminate car surface.
1. Take a moderate amount of wax and spread evenly onto car's body using included applicator sponge.
2. After surface gets dry (5-10 minutes), wipe off with a soft clean towel.
*We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.
*Drying time may be longer in winter .
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Coating agent creates super hydrophobic layer onto wheel surface, prevents brake dust adhesion and keeps beautiful condition for a long time. Nano size lotus leaf coating agent prevents adhering water, brake dust and dramatically repels the dirt. All you have to do is wash the wheels, wipe off water, remove oily component with included wipes, then spray and dry. 8 wheels are available to apply in 1 bottle.
Directions
1. Clean wheels by removing dirt with detergent and dry off water.
2. Use included wipes to decontaminate surface ensure all areas are wiped down.
3. Shake bottle well and spray 10cm away from wheel.
Allow to dry 20min in summer (30℃), 60min in winter (10℃)
Do not drive until it gets dry.
* If, surface gets whiten or liquid streak looks uneven, symptom would disappear after time goes by. (If large amount is sprayed, whiten marks will remain)
* Liquid may accumulate at bottom of tires, in case wipe off with wrung towel before it dries. If liquid adheres to other areas, wipe off immediately.
Water based liquid wax formulated to bring out the "Gloss", "Shine" and "Smoothness" to surface. Added mango scent to reduce chemical odor. Can be used as maintenance liquid for wax coated vehicles.
Directions
1. Wash the car to remove dust, dirt and water component.
2. Shake bottle well, turn nozzle.
3. Spray approximately 50cm2 area on dry paintwork.
4. Wipe off immediately dry clean microfiber towel. * Recommend to use microfiber towel to prevent unevenness.
Quick and easy glossy tire shine!Applicator can adjust for tire shape and easy to apply. Can apply up to 3-4 vehicles. High gloss finish with durability up to 6 weeks!
Directions
1. Wash off sand or dust in advance and ensure tire is dry.
2. Shake bottle well.
3. Remove cap and squeeze bottle allowing liquid to soak sponge.
4. Attach sponge side to tire sidewall and spread evenly around tire.
5. Allow to dry for approximately 5-10 minutes. No need to wipe off.
Dark & Black Wax creates a long-lasting coating of wax that brings out the deep shine of dark solid colors like black, deep blue, and brown.
Directions
*Make sure that your colour is compatible with this product. * Wash and decontaminate car surface.
1. Take a moderate amount of wax and spread evenly onto car's body using included applicator sponge.
2. After surface gets dry (5-10 minutes), wipe it off with a soft clean towel. Make sure to finish entire process. If left unfinished, may cause spots or unevenness.
3. Seal can container in order to prevent fluid from evaporating. Wash hands well with soap after use. *For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
By just lightly applying this product, you will remove dirt and apply a wax coating simultaneously, bringing out the shiny whiteness of the body paint. Solid white colour only. Only suitable for single-stage paint i.e. very-light coloured paint (like trade vans and etc.) it will not improve the appearance of clear top coat.
Directions
*Make sure that your colour is compatible with this product. * Wash and decontaminate car surface.
1. Take a moderate amount of wax and spread evenly onto car's body using included applicator sponge.
2. Rub firmly to remove heavier stains like dirt, tar, and pitch.
3. After surface gets dry (5-10 minutes), wipe it off with a soft clean towel. Make sure to finish entire process. If left unfinished, may cause spots or unevenness.
4. Seal can container in order to prevent fluid from evaporating. Wash hands well with soap after use. *For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Fusso Coat F7 is a liquid sealant based on Fusso fluorine polymers. Product creates a shiny, super hydrophobic coat on the car’s body. Included applicator gives an even and smooth application. F7 is a perfect alternative for those who live in a hurry but still want to have unparalleled paint protection. Product is durable for up to 7 months with regular maintenance.
Directions
1. Prepare vehicle by washing thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, cleaner or silicone off.
2. Apply a small amount of product onto included sponge.
3. Spread product thinly and evenly, panel by panel, with cross movements.
4. Wait for sealant to dry on surface, until white residue becomes visible.
5. Polish residue with a dry and clean microfiber cloth. *For best results we recommend bu ffing off with SOFT99 ‘Wipe Cloth’
By just applying the wax with included microfiber cloth, Mirror Shine WAX will create a mirror-like clear gloss and shine. This solid wax creates a thick-film coating without the need to wipe or dry, and it lasts for up to 3 months. May be used on plastic parts as well, such as headlight covers, car visor and tail lamps.
Directions
*Make sure car colour is compatible with this product. * Wash and decontaminate car surface.
1. Take wax using included cloth and apply evenly to car surface.
2. All you need to do is polish firmly on the surface, there is no need to wipe off.
*Make sure to finish the entire process. If left unfinished, it may cause spots or unevenness. *For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
The Kiwami, which translates to Extreme Gloss, is a great product for those who desire perfect balance between glossy finish and protection. Extreme Gloss is very easy producing a strong beading effect. Making your car paint shiny and smooth as silk! Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car colour is compatible with product.
1. Wash and decontaminate car surface.
2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.
3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.
* Drying time may be longer in cold temperature.
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Another product from the renowned Fusso family! You can feel safe about your car paint for up to 9 months after applying this product, hard polymer formed creating a protective, shiny and water-repellent shield! Improved gloss components will enable you to achieve even deeper shine on your car’s body. Mirror Shine is one of the quickest paint protection to apply - you apply it straight onto the paint with the included microfiber cloth, the effects are immediate! Available in two tones variation to produce best results depending on your vehicles paint colour.
Directions
1. Prepare vehicle by washing it thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, a cleaner or other products.
2. Apply product onto included microfiber cloth.
3. Polish liquid firmly onto surface, panel by panel and you’re done!