Another product from the renowned Fusso family! You can feel safe about your car paint for up to 9 months after applying this product, hard polymer formed creating a protective, shiny and water-repellent shield! Improved gloss components will enable you to achieve even deeper shine on your car’s body. Mirror Shine is one of the quickest paint protection to apply - you apply it straight onto the paint with the included microfiber cloth, the effects are immediate! Available in two tones variation to produce best results depending on your vehicles paint colour.
Directions
1. Prepare vehicle by washing it thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, a cleaner or other products.
2. Apply product onto included microfiber cloth.
3. Polish liquid firmly onto surface, panel by panel and you’re done!
Forget about water spots! Water Block is a sheeting wax that will make water simply slide down your car paint. Blended carnauba and high-adhesive polymers create a great combination of hydrophobicity and natural shine. Combine this wax with products from the Glaco series to create an ultimate raincoat for your car! Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car colour is compatible with product.
* Wash off any sand, dust, and dirt, and wipe off any remaining water drops.
1. Take a moderate amount of the wax and spread it evenly onto car's body using the included sponge.
2. After the surface gets dry (5-10 minutes), wipe off with a soft clean towel.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer
Forget about water spots! Water Block is a sheeting wax that will make water simply slide down your car paint. Blended carnauba and high-adhesive polymers create a great combination of hydrophobicity and natural shine. Combine this wax with products from the Glaco series to create an ultimate raincoat for your car! Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car color is compatible with product.
* Wash off any sand, dust, and dirt, and wipe off any remaining water drops.
1. Take a moderate amount of the wax and spread it evenly onto car's body using the included sponge.
2. After the surface gets dry (5-10 minutes), wipe off with a soft clean towel.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer
BLACK BLACK creates a thick-film coating on tires and maximizes shine along with super durability. The non-sticky, hard coating prevents dirt from adhering, which helps your car maintain ideal conditions by simply washing. The coating lasts for more than 60 days, and this rubbing type does not splatter over other parts.
Directions
* Be sure to wear protective gloves. * If the tire is very dirty, remove unwanted residue in advance. * Do not use this product on wet tires.
1. Shake bottle well and put liquid on black side of included sponge. Allow enough liquid to soak thoroughly into applicator sponge.
2. Apply to tire and spread evenly across the tire.
Apply repeatedly until desired level of gloss is achieved.
3. Allow coating to dry for approximately 5-10 minutes after applying.
* If liquid gets into unwanted parts, wipe it off immediately with a clean towel or SOFT99 Silicone Off (sold separately).
Creates transparent glassy "Nano crystal coating" and ultimate shine on old plastic parts, lasts more than 6 months. Can be used on heated parts such as car or motorcycle's engine cover and silencer. Compatible with unpainted resin parts on car, motorcycle, home electric appliances and even office chairs!
Directions
1. Clean surface ensuring there is no dirt or oil, completely dry prior to applying.
2. Take liquid on black side of included sponge and spread evenly. * Do not reuse old sponge.
3. Allow to dry for 5 min, wipe off evenly with dry clean towel. * Do not touch or wet car for 24 hours after applying. Coating takes 3-4 days to harden completely.
Restore headlights, blinkers and taillights. Light one is a multi-step restoration kit that gives your headlight lenses a deep clean and removes haze and discoloration.
Directions
1. Remove dust and dirt prior to cleaning and application.
2. Shake "Base Cleaner" bottle well, pour liquid onto included cloth and polish lense.
3. Wipe off with clean side of cloth.
4. Shake "Hard Top Coat" bottle well, pour liquid onto included sponge and spread evenly allowing to dry for 1 minute.
* The coating film takes 3-4 days to harden completely. Do not touch or wet the car for 24 hours after applying.
BLACK PARTS ONE - Unpainted Resin Parts Refresh Kit
Contents - 40ml Base Cleaner, 8ml Coating Liquid, 4 x Special Sheets, 4 x Sponge
Features
Restoration for unpainted resin parts such as a bumper or around wipers. Included 'Liquid Binder' removes dirt marks from the surface of resin parts, and 'Hard Clear Coat', creating a Silicon-based thick hard film coating.
Directions
1. Remove dirt, oil and any other unwanted residues from surface.
Dry completely.
2. Apply a small amount of “Liquid Binder” onto included sheet, then spread thinly and evenly.
3. Wipe off with clean side of sheet.
4. Detach one sponge, apply “Hard Clear Coat” onto black side of included sponge and spread evenly.
Prevents tires and plastic leather from deteriorating, also gives a glossy finish to the surface. Wax brings out the maximum natural shine in the texture of the material. Wiping not necessary when using on tire. When using on leather, wipe off with a cloth after spraying.
Direction
1. If you use tires, wash off mud or dirt in advance.
2. Hold about 15-25cm away from the tire sidewall and spray evenly.
If applying on leather spray and spread thinly with a dry cloth.
By just applying the wax with included microfiber cloth, Mirror Shine WAX will create a mirror-like clear gloss and shine. This solid wax creates a thick-film coating without the need to wipe or dry, and it lasts for up to 3 months. May be used on plastic parts as well, such as headlight covers, car visor and tail lamps.
Directions
*Make sure car colour is compatible with this product. * Wash and decontaminate car surface.
1. Take wax using included cloth and apply evenly to car surface.
2. All you need to do is polish firmly on the surface, there is no need to wipe off. *Make sure to finish the entire process. If left unfinished, it may cause spots or unevenness. *For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Rain Drop coating is formulated to apply onto the entire surface of car body, glass, plastic and chrome. The bazooka trigger spray design allows super-fast product application. Coating protects paint up to 3 months and glass 2 months.
Directions
1. Before use, shake can up and down about 20 times.
2. Wash vehicle to remove any dirt and dust. No need to completely dry vehicle, can apply product on wet surface.
3. Spray onto wet body/ glass, 1 second will cover about 1m2 area.
4. After spraying, immediately spread and wipe foam around surface with a microfiber or cotton towel. Wring out towel regularly.
5. Leave to dry completely for about 5 minutes in hot conditions and 20-30 minutes in winter
! WARNING: DO NOT TURN THE TAB
IF TAB IS TURNED IT WILL RELEASE THE PROPELLANT MAKING PRODUCT REDUNDANT.
TAB IS DESIGNED FOR SAFE DISPOSAL OF SPRAY CAN.
ONLY TURN TAB IN THE UPWARD DIRECTION WHEN PRODUCT IS COMPLETELY USED OR EMPTIED.
THIS WILL ALLOW FOR THE RELEASE OF PROPELLANT FROM THE CAN TO BE SAFELY DISPOSED OF.
Unique mist-mousse spray system accelerates the process of tire dressing, cutting down working time to a quarter that of conventional products. Unwanted residue just melts off and away from the tires, leaving them with a beautifully even shine. Two types of high viscosity silicones adhere to the tires, giving them a glossy, waterproof barrier.
Direction
1. Wash off any excess dirt beforehand if necessary.
2. Shake well and spray onto wet or dry tires.
3. Wait to dry before driving, or wipe away excess liquid with a cloth.
pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.
Directions
1. Wash off sand, mud or dust prior to spraying.
2. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.
3. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.
* When spray over brake disc, it reacts and changes colour.
Rinse away immediately, if left on too long, may cause bad effects for brake disc.
4. Wipe off with clean towel.
Carry out brake test with low gear 2-3 times after cleaning.
* This product is formulated for wheel.
If use for car body, carefully rinse off with water afterwards.
